In the Wi-Fi settings, you have three options: Main Network, Guest Network, and Shake to Share.ĭeco provides both 2.4GHz and 5GHz Wi-Fi networks with the same network name. Note: If you are already logged in, this screen will be skipped.ģ. Launch the Deco App, and log in with your TP-Link ID or tap Sign Up to set up a TP-Link ID. Once both networks have been changed, we suggest connecting to the 5 GHz network for performance reasons, though some devices will work better on the 2.4 GHz network depending upon the range and age of the device, among other factors.If you want to change the wireless name or wireless password of the Deco network, this guide will show you how to do this.ġ. Your router will begin broadcasting the new network name with the new password momentarily - if you have been disconnected after changing the first network, connect to the new name with the new password and repeat the previous steps to ensure that both networks have the correct names and passwords. Locate the "Wireless Password" box and enter your desired WiFi password. By default the security type should be set to "WPA/WPA2 - Personal(Recommended)" - leave this setting in place. This will take you to the wireless security settings page for the network you have currently selected. Once you have clicked save on the basic settings, click the new "Wireless Security" option in the left-hand menu. It is important to change the network you are not connected to first, so as to avoid being disconnected prematurely. Add "_2G" or "_5G" to one of the network names, so that you will be able to tell the 2.4 GHz and the 5 GHz networks apart. Change the "Wireless Network Name" to your desired network name. This will take you to the basic settings for your WiFi. If you have connected to the network ending in "_5G", click on the "Wireless 2.4GHz" option in the menu on the left-hand side of the screen (if you connected to the network which does not end in "_5G", click on the "Wireless 5GHz" option instead. If the default password does not work, reset the router to it's factory default settings by locating the WPS/Reset button on the back of the router and holding it down for 10 seconds, repeating the previous steps once the lights on the router have come back on. Once you reach the TP-Link login page, enter the username and password (by default these are both the word "admin"). Once connected to the network, open your web browser and enter the address "" - alternatively, you can enter 192.168.0.1 if does not work. Wait for the default networks to appear in your list of networks and connect using the default password. If you do not see the default networks and are unsure of your network name or password, press and hold the WPS/Reset button on the rear of the router for 10 seconds in order to restore it to its factory defaults. Connect to the network which ends with "_5G" if possible - hardwiring a laptop directly to your router using an ethernet cable will make this process simpler. The third barcode from the top contains your default WiFi password and the label beneath it will contain two network names. This information is located on the largest label on the bottom of your router. Begin by locating your TP-Link Archer C2 router and checking the label on the bottom for the default network name (SSID) and password.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |